Cisco Certification: A Survival Guide To The Cisco Cable Jungle (Paralegal certification)

December 6th, 2008

Tip! A+ training and A+ certification offer the opportunity to people who do not meet the prerequisites of other certifications. People too young or those who have a limited budget or limited time to attend a college may benefit of A+ certifications.

One of the most confusing parts of beginning your Cisco studies is keeping all the cable types separate in your mind, and then remembering what they’re used for. This often occurs when a CCNA or CCNP candidate starts putting together their own home practice lab, and they suddenly realize that they have the equipment to run labs, but not the cables.

With this in mind, here are some common Cisco cable types and their primary use.

First, there’s the regular old “straight-through cable”, so named because the eight wires inside the cable go straight through the wire. While the wires may be twisted inside to reduce electromagnetic interference (EMI), the wire that’s connected to Pin 1 on one end is connected to Pin 1 on the other end, and so on. In a home lab, a straight-through cable is often used to connect a switch port to an Ethernet port on a router, with a transceiver attached to the Ethernet port. Straight-through cables are also good for connecting a BRI interface to an ISDN simulator.

The “crossover cable” is so named because the wires do cross over between pins. This allows the devices to both send and receive at the same time, and crossover cables are a must for directly connecting ports on Cisco switches to create a trunk.

Tip! A+ training is the proof that you have received the adequate knowledge in computer systems and A+ certification confirms that you have computer training and you are capable to do common tasks, such as assemble a computer, install different operating systems and applications, and troubleshooting when needed.

The “rollover cable” allows you to connect directly to a Cisco console port with your laptop or PC. This is the blue cable that comes with new Cisco devices, and it’s the one that engineers tend to hold on to with their lives. Without a rollover cable (also commonly called a “console cable”), you can’t connect your laptop directly to a Cisco device.

Finally, there’s the DTE/DCE cable. To create a frame relay cloud in your home lab (using one of your Cisco routers as a DCE), or to directly connect two Cisco routers via their serial interfaces, you will need a DTE/DCE cable. Remember that the DCE interface will need to supply clockrate to the DTE interface.

Tip! In order to receive a pharmacy technician certification, one has to have a high school diploma. The certification is provided by the Pharmacy Technician Certification Board.

The different cable types can be confusing when you first read about them, but after tearing down or building your home lab a few times, you’ll definitely have them straight come test day!

Best of luck in your lab and your exams.

Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage, home of free CCNA and CCNP tutorials, The Ultimate CCNA Study Package, and Ultimate CCNP Study Packages. For a FREE copy of his latest e-books, “How To Pass The CCNA” and “How To Pass The CCNP”, visit the website and download your free copies. You can also get FREE CCNA and CCNP exam questions every day! Pass the CCNA exam with The Bryant Advantage!

Tags: , , , , , ,

Tags

Entry Filed under: Sports Certification

Pages

Most Recent Posts